Change language

Construction

How many bricks do I need

Bricks and mortar to build a wall from its dimensions.

Published by SolucionesAhora.com How we verify

Calculator inputs

Optional: fill it in and the cost is worked out

Results

Enter your values and press “Calculate” to see the result.

Free, no sign-up! What if you could do this without a calculator? A five-minute game with challenges, lives and points. It clicks even when you cannot be bothered.

In short

What it calculates
Bricks and mortar to build a wall from its dimensions.
Formula used
Unit area = (length + joint) × (height + joint)
Example
A 6 × 2.5 m wall with 24 × 11.5 cm bricks and a 1 cm joint:

Brick calculator

The number of bricks depends as much on the brick format as on the mortar joint thickness, which is often forgotten in the calculation.

How it works

The joint thickness is added to the brick dimensions to get the area it actually occupies in the wall, and the total area is divided by that value.

Formula

Unit area = (length + joint) × (height + joint)

Bricks = area ÷ unit area × (1 + waste)

Mortar ≈ area × 0.02 m³

Worked example

A 6 × 2.5 m wall with 24 × 11.5 cm bricks and a 1 cm joint:

Area: 15 m²
Unit area: 0.0313 m²
Bricks: 513 including 7% waste

Explanation

Wall thickness changes the whole calculation

A half-brick partition is not the same as a one-brick wall. Each bond consumes a different number of units per square metre, and so does the mortar. Before calculating you need to be clear which type of masonry you are building, because doubling the thickness practically doubles the material.

Mortar is not negligible

Joints are usually one to two centimetres, and summed across the whole surface they represent an appreciable share of the wall's volume. Twenty to thirty litres of mortar per square metre is a common estimate for half-brick work, though it depends on joint thickness and unit format.

Allow for breakage and cuts

Five per cent wastage is the reasonable minimum, and it should rise on walls with many openings, corners or junctions where units are constantly cut. Broken pieces are rarely usable whole elsewhere.

Buy from the same batch

In facing brick, colour varies noticeably between firings. If the wall is to be left exposed, mixing batches produces tonal patches that only become apparent once the wall is up.

Frequently asked questions

Does wall thickness count?

This calculation assumes a single-leaf wall. A double-leaf wall needs twice the bricks.

How much mortar is needed?

About 0.02 m³ per square metre with 1 cm joints, though it varies with the brick format.

How much mortar do I need?

Twenty to thirty litres per square metre for half-brick work, depending on joint thickness and unit format.

How much wastage should I allow?

Five per cent as a minimum, and more on walls with many openings, corners or junctions requiring cuts.

Need to calculate something else?

These tools are often used alongside this calculator.

Concrete

Concrete volume plus the cement, sand, gravel and water needed.

Room area

Floor, walls, perimeter and volume from three measurements.

Tiles

Tiles required based on tile size and the area to cover.

Areas

Calculate the area and perimeter of squares, circles, triangles, trapezoids and ellipses.

Paint

Litres of paint based on surface area, coats and product coverage.